Uptake, translocation, and nutrient efficiency of nano-bonechar as a plant growth regulator in hydroponics and soil systems.

The use of nanotechnology in terms of nanoparticles, carbon nanotubes, and quantum dots, when exposed to the plants, helps increase their productivity. It is worth the effort to comprehend the fate of these nanoparticles in plants. Bonechar derived from bones is a rich source of C, P, Ca2+, and Mg2+ nutrients, which can significantly contribute to the growth of the plants. This study focused on the uptake of nano-bonechar (NBC) in the Syngonium podophyllum plant, and its effects on plant growth under hydroponics and soil systems. The compound microscopy and SEM-EDX results confirmed the presence of NBC in the leaves and roots of the plants in hydroponics and soil systems. The FTIR spectra reflected the presence of functional groups of the NBC in the leaves of the Syngonium podophyllum plant. The plant's growth parameters showed an increase in fresh weight, dry weight, shoot length, chlorophyll content, leaf count, total Ca2+, total PO43-, and total organic carbon of plants in both systems. The NBC not just improved plant physiochemical parameters but also built up the soil quality in terms of bioavailable Ca2+, PO43-, water holding capacity, and soil organic matter. It is concluded that the production of carbon-based NBC not only helps manage bone waste but also their efficient uptake in plants significantly improving plant productivity.

Uncovering nano-bonechar for attenuating fluoride in naturally contaminated soil.

Fluoride ion (F-) is one of the major geogenic contaminants in water and soil. Excessive consumption of these geogenic contaminants poses serious health impacts on humans and plants. In this study, a novel carbonaceous material, nano-bonechar, was synthesized from cow bones and applied as a soil amendment at rates of 0, 0.5, 1, and 2% to remediate and revitalize naturally F--contaminated soil. The results revealed that the nano-bonechar significantly reduced the mobility and bioavailability of F- by 90% in the contaminated soil, and improved the soil quality by increasing the soil water holding capacity, soil organic matter, and the bioavailable contents of PO43-, Ca2+, and Na+. Subsequently, the pot experiment results showed a significant reduction in the uptake of F- by 93% in Zea mays plants. Moreover, the nano-bonechar application improved the plant's growth, as indicated by the higher fresh and dry weights, root and shoot lengths, and total content of PO43-, Ca2+, and K+ than those of un-amended soil. The F-immobilization in soil was mainly due to the presence of the hydroxyapatite [Ca10(PO4)6(OH)2] mineral in the nano-bonechar. Ion exchange between OH- (of nano-bonechar) and F- (of soil), and the formation of insoluble fluorite (CaF2) contributed to the attenuation of F- mobility in the soil. It is concluded that nano-bonechar, due to its size and enrichment in hydroxyapatite, could successfully be utilized for the rapid remediation and revitalization of F--contaminated agricultural soil.

Improved catalytic efficiency of chimeric xylanase 10B from Thermotoga petrophila RKU1 and its synergy with cellulases.

TpXyl10B is a glycoside hydrolase family 10 xylanase of hyperthermophile Thermotoga petrophila RKU-1. This enzyme is of considerable importance due to its thermostability. However, in its native state, this enzyme does not possess any carbohydrate-binding module (CBM) for efficient binding to plant biomass. In this study CBM6 from Clostridium thermocellum was attached to the N- and C-termini of TpXyl10B, thereby producing the variants TpXyl10B-B6C and TpXyl10B-CB6, respectively. TpXyl10B-B6C showed 5-7 folds increased activity on Beechwood xylan and the different types of plant biomass as compared to that from the catalytic domain only. However, the activity of TpXyl10B-CB6 decreased 0.6-0.8 folds on Beechwood xylan and plant biomass compared to the catalytic domain. We explained these results through molecular modeling, which showed that binding residues of CBM6's cleft B, which were previously reported to show no contribution towards binding due to steric hindrance from a loop region, were exposed in a favorable position in TpXyl10B-B6C such that they efficiently bound the substrate. In contrast, these binding residues of CBM6 in TpXyl10B-CB6 were exposed opposite to the catalytic residues; thus, binding to the substrate resulted in decreased exposure of catalytic residues to the substrate. CD spectroscopy and thermostability assays showed that TpXyl10B-B6C was highly thermostable, having a melting point > 90 °C, which is relatively higher than that of the other variant, TpXyl10B-CB6. In addition, this xylanase variant showed synergism with cellulases for the hydrolysis of plant biomass. Therefore, TpXyl10B-B6C, an engineered xylanase in this study, can be a valuable candidate for industrial applications.

Spatial distribution and computational modeling for mapping of tuberculosis in Pakistan.

BACKGROUND: Tuberculosis (TB) like many other infectious diseases has a strong relationship with climatic parameters. METHODS: The present study has been carried out on the newly diagnosed sputum smear-positive pulmonary TB cases reported to National TB Control Program across Pakistan from 2007 to 2020. In this study, spatial and temporal distribution of the disease was observed through detailed district wise mapping and clustered regions were also identified. Potential risk factors associated with this disease depending upon population and climatic variables, i.e. temperature and precipitation were also identified. RESULTS: Nationwide, the incidence rate of TB was observed to be rising from 7.03% to 11.91% in the years 2007-2018, which then started to decline. However, a declining trend was observed after 2018-2020. The most populous provinces, Punjab and Sindh, have reported maximum number of cases and showed a temporal association as the climatic temperature of these two provinces is higher with comparison to other provinces. Machine learning algorithms Maxent, Support Vector Machine (SVM), Environmental Distance (ED) and Climate Space Model (CSM) predict high risk of the disease with14.02%, 24.75%, 34.81% and 43.89% area, respectively. CONCLUSION: SVM has a higher significant probability of prediction in the diseased area with a 1.86 partial receiver-operating characteristics (ROC) value as compared with other models.

Engineering processive cellulase of Clostridium thermocellum to divulge the role of the carbohydrate-binding module.

The processive cellulase (CelO) is an important modular enzyme of Clostridium thermocellum. To study the effect of the carbohydrate-binding module (CBM3b) on the catalytic domain of CelO (GH5), four engineered derivatives of CelO were designed by truncation and terminal fusion of CBM3b. These are CBM at the N-terminus, native form (CelO-BC, 62 kDa); catalytic domain only (CelO-C, 42 kDa); CBM at the C-terminus (CelO-CB, 54 kDa) and CBM attached at both termini (CelO-BCB, 73 kDa). All constructs were cloned into pET22b (+) and expressed in Escherichia coli BL21 (DE3) star. The expression levels of CelO-C, CelO-CB, CelO-BC, and CelO-BCB were 35%, 35%, 30%, and 20%, respectively. The enzyme activities of CelO-C, CelO-CB, CelO-BC, and CelO-BCB against 1% regenerated amorphous cellulose (RAC) were 860, 758, 985, and 1208 units per µmole of the enzyme, respectively. The enzymes were partially purified from the lysate of E. coli cells by heat treatment followed by anion exchange FPLC purification. Against RAC, CelO-C, CelO-CB, CelO-BC, and CelO-BCB showed KM values of 32, 33, 45, and 43 mg⋅mL-1 and Vmax values of 3571, 3846, 3571, and 4545 U⋅min-1 , respectively. CBM3b at the N-terminus of GH5 linked through a P/T-rich linker was found to enhance the catalytic activity and thermostability of the enzyme.

A nucleotide-sensing oligomerization mechanism that controls NrdR-dependent transcription of ribonucleotide reductases.

Ribonucleotide reductase (RNR) is an essential enzyme that catalyzes the synthesis of DNA building blocks in virtually all living cells. NrdR, an RNR-specific repressor, controls the transcription of RNR genes and, often, its own, in most bacteria and some archaea. NrdR senses the concentration of nucleotides through its ATP-cone, an evolutionarily mobile domain that also regulates the enzymatic activity of many RNRs, while a Zn-ribbon domain mediates binding to NrdR boxes upstream of and overlapping the transcription start site of RNR genes. Here, we combine biochemical and cryo-EM studies of NrdR from Streptomyces coelicolor to show, at atomic resolution, how NrdR binds to DNA. The suggested mechanism involves an initial dodecamer loaded with two ATP molecules that cannot bind to DNA. When dATP concentrations increase, an octamer forms that is loaded with one molecule each of dATP and ATP per monomer. A tetramer derived from this octamer then binds to DNA and represses transcription of RNR. In many bacteria - including well-known pathogens such as Mycobacterium tuberculosis - NrdR simultaneously controls multiple RNRs and hence DNA synthesis, making it an excellent target for novel antibiotics development.

Enhanced serodiagnostic potential of a fusion molecule consisting of Rv1793, Rv2628 and a truncated Rv2608 of Mycobacterium tuberculosis.

Serodiagnosis of tuberculosis (TB) can be rapid, reliable and cost-effective if the issue of variable antibody responses of TB patients against different Mycobacterium tuberculosis (Mtb) antigens can be overcome by developing fusion proteins containing epitopes from multiple antigens of Mtb. In this study, Mtb antigens Rv1793, Rv2628, Rv2608 and a truncated variant produced by removing non-epitopic region from N-terminal of Rv2608 (tnRv2608), and the fusion protein Rv1793-Rv2628-tnRv2608 (TriFu64), were expressed in E. coli and purified. Plasma samples from TB patients characterized by sex, age and sputum/culture positivity, were used to compare the sensitivity of the single antigens with the fusion protein. Sensitivity of Rv1793, Rv2628 and Rv2608, was 27.8%, 39% and 36.3%, respectively. Truncation of Rv2608 increased sensitivity by approximately 35% in confirmed TB cases. Sensitivity of the fusion construct, TriFu64 increased to 66% with a specificity of 100%. Importantly, tnRv2608 was better able to detect sputum and culture negative patients, and this carried through to the fusion protein. We demonstrate that fusion of Mtb proteins ensures broad sensitivity across disease types, sex and age groups in a Pakistani population.

Development of multi-epitope vaccine constructs for non-small cell lung cancer (NSCLC) against USA human leukocyte antigen background: an immunoinformatic approach toward future vaccine designing.

OBJECTIVES: The design of peptide-based vaccines for cancer is a promising immunotherapy that can induce a cancer-specific cytotoxic response in tumor cells. METHODS: Herein, we used the immunoinformatic approach in designing a multi-epitope vaccine targeting G-protein coupled receptor 87 (GPCR-87), cystine/glutamate transporter (SLC7A11), Immunoglobulin binding protein 1 (IGBP1), and thioredoxin domain-containing protein 5 (TXNDC5), which can potentially contribute to NSCLC. The MHC-I and MHC-II epitopes selected for the fusion construct were evaluated for their antigenic and non-allergenic natures via VaxiJen and AllerTop. RESULTS: A total of five epitopes, four class-I (FIFYLKNIV, CRYTSVLFY, RYLKVVKPF, and RQAKIQRYK), and one class-II (NQVRGYPTLLWFRDG), having combined USA population coverage of 100%, were used to make ten possible multi-epitope fusion constructs. In these constructs, PADRE, a universal T-helper epitope, and RSO9, a TLR4 agonist, were fused as adjuvants. The molecular docking analysis revealed that two constructs were showing significant binding affinities toward HLA-A*02:01, the most prevalent HLA allele in USA. Moreover, MD simulations marked one construct as a promising therapeutic candidate. CONCLUSION: The multi-epitope vaccine constructs designed using immunogenic, and non-allergenic peptides of NSCLS tumor-associated proteins are likely to pose significant therapeutic efficacies in cancer immunotherapy due to their high binding affinities toward HLA molecules.

A novel trifunctional, family GH10 enzyme from Acidothermus cellulolyticus 11B, exhibiting endo-xylanase, arabinofuranosidase and acetyl xylan esterase activities.

A novel, family GH10 enzyme, Xyn10B from Acidothermus cellulolyticus 11B was cloned and expressed in Escherichia coli. This enzyme was purified to homogeneity by binding to regenerated amorphous cellulose. It had higher binding on Avicel as compared to insoluble xylan due to the presence of cellulose-binding domains, CBM3 and CBM2. This enzyme was optimally active at 70 °C and pH 6.0. It was stable up to 70 °C while the CD spectroscopy analysis showed thermal unfolding at 80 °C. Xyn10B was found to be a trifunctional enzyme having endo-xylanase, arabinofuranosidase and acetyl xylan esterase activities. Its activities against beechwood xylan, p-Nitrophenyl arabinofuranoside and p-Nitrophenyl acetate were found to be 126,480, 10,350 and 17,250 U µmol-1, respectively. Xyn10B was highly active producing xylobiose and xylose as the major end products, as well as debranching the substrates by removing arabinose and acetyl side chains. Due to its specific characteristics, this enzyme seems to be of importance for industrial applications such as pretreatment of poultry cereals, bio-bleaching of wood pulp and degradation of plant biomass.

Impact of orientation of carbohydrate binding modules family 22 and 6 on the catalytic activity of Thermotoga maritima xylanase XynB.

Xylanase XynB of the hyperthermophile Thermotoga maritima, which belongs to glycoside hydrolase family 10 (GH10), does not have an associated carbohydrate binding module (CBM) in the native state. CBM6 and CBM22 from a thermophile Clostridium thermocellum were fused to the catalytic domain of XynB (XynB-C) to determine the effects on activity and other properties. XynB-B22C and XynB-CB22, produced by fusing CBM22 to the N- and C-terminal of XynB-C, showed 1.7- and 3.24-fold increase in activity against the insoluble birchwood xylan, respectively. Similarly, CBM6 when attached to the C-terminal of XynB-C resulted in 2.0-fold increase in activity, whereas its attachment to the N-terminal did not show any increase of activity. XynB-B22C and XynB-CB22 retained all the activity, whereas XynB-B6C and XynB-CB6 lost 17 and 11% of activity, respectively, at 60°C for 4h. Thermostability data and the secondary structure contents obtained by molecular modelling are in agreement with the data from circular dichroism analysis. Molecular modelling analysis showed that the active site residues of the catalytic domain and the binding residues of CBM6 and CBM22 were located on the surface of molecule, except XynB-B6C, where the binding residues were found somewhat buried. In the case of XynB-CB22, the catalytic and the binding residues seem to be located favorably adjacent to each other, thus showing higher increase in activity. This study shows that the active site residues of the catalytic domain and the binding residues of the CBM are arranged in a unique fashion, not reported before.